CLOSEOUT!!! 30% OFF!!! Reduce your lever effort with CNC Racing's clutch slave cylinder for your Panigale. 26mm isn't the Easiest Pull offered but if you are racing or dont have to hold your clutch lever very long, its very Crisp! CNC machined from light billet alloy and then given a colored anodized surface finish and a beautiful "race-style" look. Featuring improved hydraulic seals to prevent leaks and increase durability, and available with your choice of a 26mm with few Ergal color in 28 or 30mm piston size, and available in your choice of Multiple beautiful anodized finishes. Original piston size is 22mm in diameter, resulting in fatigued hands and forearm pump. CNC Racing's larger diameter clutch slaves reduce lever effort by over 25%, and the bigger the piston, the easier the lever pull. The only drawback to a larger clutch slave is you do technically have to pull the lever in slightly further to engage the clutch to the same extent as with a smaller piston, so if you prefer shorty levers, we recommend the 26 or 28mm size (to avoid contact with your other fingers when pulling the lever in with only 2). If you are using standard length levers, we recommend the 28 or 30mm size. If you have upgraded your clutch to an aftermarket slipper clutch, choose the 28mm size for best results.