FEULING PARTS HP+® Oil System Packs for M8

$1,029.95

Availability In stockUsually processes in 1 business day Compatibility Ask about compatibility Shop Pay installmentsFlexible monthly plans

Shop Pay installment terms

Rates from 0–36% APR. Payment options through Shop Pay Installments are subject to an eligibility check and are provided by Affirm lending partners. Options depend on your purchase amount, and a down payment may be required. State notices to consumers. Displayed payment estimates use the current product price. Taxes, shipping, discounts, and the final checkout total can change available options and payment amounts.

P4M+ rewards 5150 P4M+ points with this product. Plus automatic entry in our monthly giveaway. Nothing else to do.

5 pts / $1

Availability In stock Ready for fulfillment

Fitment We can verify fitment Ask before ordering if your bike is not obvious

Manufacturer part number 09320198 FEULING PARTS

Shipping Processes within 1 business day Standard U.S. delivery is typically 2-5 business days after shipment

Fitment help Warranty support Returns & refunds Secure checkout

Parts-counter style support, online. Questions about fitment, ETA, or returns can be checked before ordering, and P4M stays responsible for order support after checkout.

Current offer Save 10% with code SUMMER10 Enter the code at checkout. The discount is confirmed there. Current offer Save $102.99 · $926.96 after SUMMER10 One tap applies the code and keeps this product selected. Apply SUMMER10

FEULING PARTS HP+® Oil System Packs for M8

FEULING PARTS HP+® Oil System Packs for M8 by FEULING PARTS is a fluids & cleaners listing built for riders searching by exact product name, fitment, style, and part number.

Key Features

Includes FUELING® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or FUELING® OE+ camplates
Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
FUELING® oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi
Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
FUELING® oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systems
FUELING® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal
Quieter and smoother engine operation
Increase oil pressure, scavenge volume and engine oil flow
42% more scavenge volume with port sizing, matched passages and holes to the engine case
68% more oil volume to the crankshaft and connecting rod bearing
Engine temperatures run 15°-25° cooler
Oil temperatures run 15°-30° cooler
10-30 lbs more psi of oil pressure
Reduces wet sumping, blowby and oily air cleaners
Test results show 2 HP gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight
Includes billet 6061 aluminum high volume oil pump, High Flow camplate, HP+® Hydraulic roller lifters, cam installation kit, cam bearing, cam/crank bolts and washers, engine and fastener assembly lube
Made in the USA
Optional FUELING® X ARP bolt kit available for the High Flow camplate PART #0932-0192 and HP+ or RS oil pump combo. See PART #2401-0993, optional ARP oil pump bolts do not use washers.
Optional FUELING® X ARP oil pump/camplate bolt kit available PART #2401-0993.
FUELING® test results show as much as 50% reduction of engine sump oil level.
M-Eight engines must check clearance on front exhaust lifter to camshaft flange fit.

Part Numbers

0932-0198, 7096, 0932-0217, 7098

Available Styles

Oil System / HP+® / Oil Cooled / M8; Oil System / HP+® / Water Cooled / M8

Available options: 2

Description